Comparison of Evaporation Methods for Sultansazlığı Wetland
Journal Title: Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji - Year 2014, Vol 2, Issue 3
Abstract
Sultansazlığı Wetland is located at 70 km south of Kayseri city and it is placed at the center of Develi Closed Basin. South (Örtülüakar) and North (Kepir) Reedfields, Yay Lake and Çöl Lake are placed at Sultansazlığı Wetland. South and North reedfields have fresh water, Yay Lake has salty water, Çöl Lake which is placed at the Northwest of Sultansazlığı has very salty water. Aim of this study is to compare the evaporation from Sultansazlığı Wetland by using the different evaporation calculation methods and to compare the evaporation observations from fresh water and salty water. In the content of the study; evaporation from free water surface of Sultansazlığı had been computed by using Penman and Artificial Neural Network Model then the evaporation results were compared with the real evaporation observations. Additionally evaporations from salty and fresh water at Yay Lake (Yenihayat) Station are compared and it is determined that total annual evaporation of fresh water is 5.1% more than the total annual evaporation of salty water.
Authors and Affiliations
F. Ebru YILDIZ, İbrahim GURER
Keywords
Related Articles
- EP ID EP469861
- DOI -
- Views 118
- Downloads 0
The Effect of Copper Plating Processes on Corrosion Resistance of Castings Produced from Zinc-Aluminum Alloy
Different surface treatment processes are applied on cast piece made of zinc-aluminum alloys in order to increase their service life and improve their effective use. Among the alternatives, electrochemical coating proces...
Investigation of Optimum Intermediate Pressure in Two-Stage Critical Overhead CO2 Cycle Cooling Systems
In this study, the variation of optimal inter-stage pressure of two stage transcritical CO2 cooling cycle with evaporating temperature and gas cooler outlet temperature of CO2 is theoretically studied. However optimum ga...
Determination of Optimum Cutting Parameters Affecting the Surface Form Properties in the Ductile Stainless Steels with Gray Relational Analysis Method
In this study, the effects of cutting parameters with different coatings (TiAlN and TiN) on drilling performance were investigated. Drilling operations were carried out on duplex stainless steels by drilling holes 20 mm...
Teorical and experimental investigation of system dynamics in a process control simulator developed with wireless control purpose
System identification is a very important process that affects the success of process control operations. For the system identification, the theoretical studies have been done by using experimental and MATLAB in the wire...
The Effects of Weft Density, Weft Yarn Count and Weave Type on Air and Water Vapor Permeability in 100% Acrylic Woven Fabrics
In this study, the effects of weft yarn count, weft density and weave type on the air and water vapor permeability properties of 100% acrylic woven fabrics were examined and evaluated statistically. Fabrics were produced...