Design and Fabrication of Low Cost Paper Recycling Equipment
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2017, Vol 7, Issue 6
Abstract
Paper has become a part of human life in various aspects and it is becoming even more popular now-a-days. With the increase in consumption of paper, the problem of raw material sources is emerging. This ultimately resulted in exploitation of natural resources. Recycling of paper has become vital, since the demand for paper has increased. A survey is conducted in G Pulla Reddy Engineering College (GPREC) campus and identified the sources of waste paper. In this paper, the design and fabrication of manually operated paper recycling equipment has been presented. Recycled paper has been extracted from the equipment. H2O2 as deinking agent, Guar Gum as adhesive and Boric powder as softening agent have been added to the pulp to enhance its quality. Cost analysis has been done to analyze the budget of the equipment.
Authors and Affiliations
M. Naga Phani Sastry, K. Devaki Devi
Keywords
Related Articles
- EP ID EP254662
- DOI -
- Views 80
- Downloads 0
Effect of Polyacrylamide with ZnO Nano Aqueous Solution on the Chemical Flooding Method with Enhanced Oil Recovery EOR) – An Experimental and Modelling Study
This work studied the effect of polyacrylamide (PAM) with ZnO nanoparticles (NPs) solution on the recovery of crude oil in tertiary stage. Shear viscosity due to shear rate and salt concentration, also shear stress with...
A Review on Various Beam Theory Techniques for Dynamic Analysis of Rotating Laminated Shafts
The composite laminated shafts have wide ranging applications in various mechanical devices that include cylindrical tubes used in the marine and automotive industries and centrifugal separators of helicopters. Rotating...
Synthesis Characterization and Mechanical Behavior of Rice Husk Ash Reinforced Al-20mg 10 Cu Alloy Matrix Hybrid Composites
The aim of this work is to fabricate hybrid composites by using Rice husk ash (RHA), an agro waste as reinforcement to AL-20MG-10CU high strength alloy. Rice husk ash particles of 3, 6, 9 & 12 % by weight were used, to d...
CFD Analysis of the Effect of Mach Number on Scramjet Combustion
Understanding the scramjet combustion and significant effect of each parameter is very much important for the design and analysis. The computational analysis has been carried out by using the commercial software FLUENT....
An Effect of Wall Corner Radius of Punch on the Features of the Hexagonal Cup Fabricated by the Deep Drawing Process
This work aims to study the effect of different deep drawing process parameters on the distribution of strain and thickness in deep drawing operation, such as wall corner radius of punch, the thickness of the sheet, and...