Design of Compact Composite Right-Left-Handed Transmission Line Unit Cells
Journal Title: International Journal of Electronics Communication and Computer Technology - Year 2014, Vol 4, Issue 4
Abstract
A new unit cell composite right/left-handed (CRLH) metamaterial using microstrip technology with coupled line is proposed. It is simple and has a small size. The proposed unit cell can be designed in several frequency bands based on its geometrical parameters. The transition from LH to RH shows the balanced condition without the presence of stop band. Two designs for two different frequency bands have been carried out. The frequency band of the first design is about 320 MHz and the band of the second design is about 1.3 GHz. This unit cell is fabricated and its measurement results are shown. Good agreement has been achieved between the theoretical and the experimental results.
Authors and Affiliations
Khalid M. Ibrahim| Electrical and Communication Engineering Faculty of Electronic Engineering, Menofia University Menouf, EGYPT, EL-Sayed M. El-Rabaie| Electrical and Communication Engineering Faculty of Electronic Engineering, Menofia University Menouf, EGYPT, Abdel-Aziz T. Shalaby| Electrical and Communication Engineering Faculty of Electronic Engineering, Menofia University Menouf, EGYPT, Ahmed S. Elkorany| Electrical and Communication Engineering Faculty of Electronic Engineering, Menofia University Menouf, EGYPT
A High Capacitive and Confidentiality Steganography Using Private key
Steganography and Steganalysis are two important areas of research that involve a number of applications. These two areas of research are important especially when reliable and secure information exchange is required. To...
ESD Protected Bandgap Reference Voltage Chip
Bandgap Reference voltage chip is implemented in 0.25?m CMOS technology with ESD protection. This chip can be designed by using a layout tool micro wind 3.1.7 version. The chip circuit generates a reference voltage of 1....
Embedded Ethernet Controller using ARM LPC2138
With the development of network technology and communication technology needs that industrial control can be completed via network has become a trend. Here the proposed system consists of an ARM processor LPC2148 with an...
Peak to Average Power Ratio Reduction in OFDM System by Clipping and Filtering
This paper results clipping and filtering technique for peak to average power ratio (PAPR) reduction in orthogonal frequency division multiplexing (OFDM). Our simulation results show that this technique removes inband an...
Real-Time Video Streaming over NS3-based Emulated LTE Networks
In this paper, we present a developed NS-3 based emulation platform for evaluating and optimizing the performance of the LTE networks. The developed emulation platform is designed to provide real-time measurements. Th...