Design of Protection Coordination for Overcurrent on Electrical System in Tanker Ship Plan Using Electro Mechanical Trip Device
Journal Title: International Journal of Marine Engineering Innovation and Research - Year 2017, Vol 1, Issue 4
Abstract
Disturbance of power system in ship is unavoidable case that required a function from safety system to separate the affected parts of system. The disturbance in electrical system generally is a short-circuit current. It is affected when there are two conductors having lowest impedance in normal condition that have two different voltages thus causing an overcurrent. There is one of the device protection to prevent a disturbance like short circuit current, is circuit breaker. It opens the contact with component or system that disturbance using electromechanical trip device. The principal operating of trip device is using electric current flow in the circuit breaker and the magnet induces the tripping part to moving the contact from closed position to the opened position. The main discussion is to coordinate circuit breakers in four operating conditions of the ship's generator using software ETAP. The simulation of the result obtained value of short circuit in main bus one at sailing condition is 8.2 kA. Tripping time for the circuit breakers in sailing condition at one typical disturbance are 0.75 seconds for circuit breaker number 29; 0.83 seconds for circuit breaker number 37 and 1 second for circuit breaker number 28.
Authors and Affiliations
Indra Ranu Kusuma, Eddy Setyo Koenhardono
Design of High Rate Blender Hydraulic Power Pack Unit on Stimulation Vessel – Study Case Stim Star Borneo for Offshore Operations at Delta Mahakam area – East Borneo
Application of Hydraulic Power technology in world industry today is still continue to increased. Not only in Industrial it’s self, but in Marine, Onshore and Offshore also use these technologies. Requirement of service...
Design of Flettner Rotor in Container Carrier 4000 DWT with CFD Method
Flettner rotor is a technology that utilizes the natural wind to help the oncoming vessel. The working principle of the flettner rotor corresponds to the theory of magnus effect, in which the force arises due to the diff...
Technical Analysis Ballast Water Treatment By Using Economizer Utilizing Main Engines Exhaust Heat To Comply With International Ship Ballast Water Management At Mv. Leader Win
Based on the International Ballast Water Management regulations (IBWM), waste water ballast itself has the attention of some researchers to reduce the amount of waste species present in the ballast water with a variety o...
Fluid Distribution Analysis of Kite Sail for Application on Ship
The increasing number of operating ships resulted in high air pollution from the combustion of the ship's engine. Efforts to utilize alternative energy to reduce ship engine work have been done, one of them is using unli...
Experimental Study of Thermoelectric Generator as Electrical Source of Impressed Current Cathodic Protection for Ship Hull
Impressed Current Cathodic Protection (ICCP) is a method to protect metallic material such as ship hull from corrosion by using electric current. In this research, a prototype of thermoelectric generator is developed in...