Design of High Rate Blender Hydraulic Power Pack Unit on Stimulation Vessel – Study Case Stim Star Borneo for Offshore Operations at Delta Mahakam area – East Borneo
Journal Title: International Journal of Marine Engineering Innovation and Research - Year 2017, Vol 1, Issue 2
Abstract
Application of Hydraulic Power technology in world industry today is still continue to increased. Not only in Industrial it’s self, but in Marine, Onshore and Offshore also use these technologies. Requirement of service in well services - Offshore Delta Mahakam region makes PT. Halliburton Indonesia as a Service Company increase his fleet service. The Type Stimulation Vessel Fleets - Stim Star Borneo is planned to improve the service unit of High Rate Water Pack (HRWP) with High Pressure Pump unit plus Gravel Pack Sand (GP) and High Rate Blender Unit. Blender High Rate is a unit tubular mixing blender driven by hydraulic power, motors blender, sand screw, pump suction and discharge pump that’s is installed unity. For that The authors will plan system, calculation and specifications of Hydraulic Power Pack Unit for High Rate the Blender. Calculations start from of Operasional Requirement Conditions, and continued with Design Block Diagram, P & ID, and also calculations of systems such as Head, RPM, Pipe Diamater, Pipe Thickness, Main Hydraulic Pump, Reservoir Tank and Cooler. Where The Requirement of Hydraulic Main Pump Power is 950 kW with Electric Motor as prime mover 950 kW. The final result of the design is show as Layout and Detail drawing in attachment.
Authors and Affiliations
Hari Prastowo, Sutopo Purwono Fitri, Raja Oloan Saut Gurning
Keywords
Related Articles
- EP ID EP221183
- DOI 10.12962/j25481479.v1i2.2069
- Views 422
- Downloads 0
Heat Transfer Analysis of Thermal Oil Plant on Fuel Oil Tanks of 17500 LTDW Product Oil Tanker
The thermal oil system is one type of heater that widely used on ships. The system is an important system used to heat fuel that will be used for the operation of the main engine, auxiliary engine, and boiler. This syste...
The Hull Strength of Marine Current Turbine Platform
Strength analysis of hull structure of marine renewable energy is crucial. The hull structure must be able to whitstand the harsh environmental load such as wave, wind and the weight of the payload and the structure itse...
Study on Safety of Navigation using Automatic Identification System for Marine Traffic Area Case Study: Malacca Straits
International Maritime Organization (IMO) has recommended the implementation of Automatic Identification System (AIS) to improve the safety of navigation at marine traffic area. Based on regulation, IMO requires AIS to b...
Design of Air Ventilation System for Cargo Hold Vessels Using Solar Desiccant
One of the facilities and infrastructure of the vessel is the ventilation system in the cargo hold to maintain the quality. One attempt to avoid high moisture ratios is to provide a dry air supply by using desiccants. Th...
Analysis of Three Phases Asynchronous Slip Ring Motor Performance Feedback Type 243
Induction motor is an Alternating Current Electric Motor (AC), this motor most widely used. There are two types of rotor on three-phases asynchronous motor, the squirrel-cage rotor and the slip ring rotor. Every motor ha...