Effect of Permanent Magnetic Pole Orientation on Field Strength in Viscoelastic Magnetic Abrasive Finishing Process
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 5
Abstract
Viscoelastic magnetic Abrasive Finishing is a new method which has evolved from traditional MAF process where an abrasive- Ferromagnetic laden media is used which provides an effective machining option. In this process,, along with an abrasive particles in presence of a viscoelastic medium is used to provide better surface finish as viscoelastic medium increases the bonding of ferromagnet particles with abrasive particles. In the present paper Ansys Maxwell 16.0is used to obtained the distribution of Fan shaped magnetics by using Magnetic field on the workpiece through which the effective surface of machining can be predicted. The pattern is obtained using combination of 4 magnetic poles taken 2,3 and 1 at a time by arranging them at different angles. After observing the pattern, it was found that the most effective machining would be done by taking 4 poles surrounding the workpiece as it would cover the entire surface of the workpiece and the combination of 3 magnet at an angle of 120 degree is effective when 3 poles are taken at a time. 90-degreeangle between the pole must be taken when we are using two poles as the magnetic field intensity is maximum in this combination.
Authors and Affiliations
K. Srinivas, Q. Murtaza, A. K Aggarwal
Keywords
Related Articles
- EP ID EP671632
- DOI 10.24247/ijmperdoct20195
- Views 83
- Downloads 0
ASSESSMENT OF LEAN PERFORMANCE OF MANUFACTURING CELLS IN AN SME USING AHP
Lean Manufacturing is a tool widely used in manufacturing enterprises in order to remove any sort of waste and maximize the efficiency. After the lean principles have been implemented in an enterprise, it is very necessa...
Wear Analysis by Taguchi Technique of Al6061 Based Hybrid Composite Reinforced with Sic and Al2o3
In this paper, wear characteristics of hybrid composite of Al6061 was studied. Hybrid composite was reinforced with silicon carbide (SiC) with varying (3%, 6%, 9%) weight % and keeping the alumina (Al2O3) with constant (...
Forced Convection upon Heat Sink of AL-Cu for Design Optimization by Experimental and CFD Analysis for Cooling in CPU
A heat sink device, for use with specific power input at 100V and 20W to the heater, attached at the base plate of copper, and then obtained the average temperature of Heat sink with the help of 12 thermocouples. Two spe...
Demand and Supply Analysis on Manufacturing of Cement for Monsoon Periods Using Dvorak Technique
In India cements manufacturing industries are the second largest industry, giving more market share and in the increasing trend. Infrastructures and investments in the construction of buildings in India are growing expon...
An Analysis of the Quality Award Model by AHP
This paper is proposed as a model for ranking of fields, criteria and sub-criteria in the quality award model. It is based on the Analytic Hierarchy Process (AHP). The AHPis used to find the criteria’s weigh...