Experimental Studies on the Dielectric Behaviour of Polyester Woven Fabrics
Journal Title: Fibres and Textiles in Eastern Europe - Year 2016, Vol 24, Issue 3
Abstract
In this paper, the influence of fabric structure, weft density, end spacing and yarn fineness on the dielectric constant of polyester woven fabrics was studied. The results show that at low frequencies, the dielectric constant of fabric was clearly affected by the processing parameters; when the organisation of the fabric is plain i.e. the warp density is 140/10 cm, weft density 140/10 cm and yarn linear density 32 tex, the absorbing performance of polyester woven fabrics is at its best. At higher frequencies, the effect of the varying parameters on the dielectric constant of the fabrics can be neglected. Polyester woven fabrics have better EM absorbing properties for these parameters. This study offers a new theoretical basis for the development of EM absorptive fabrics.
Authors and Affiliations
Yuanjun Liu, Xiaoming Zhao
Relation between Extension and Bursting Strength Properties of the Denim Viewed Knitted Fabrics Produced by Cellulosic Fibers
Denim viewed knitted fabrics are softer, cheaper, and more elastic than woven denim fabrics. Clothes which are produced by these fabrics adapt the body movement easily because of their flexible structure. Since these fab...
Study on the Change in Characteristics of Ring Yarn during Post Spinning and Yarn Dyeing Operations
The origin of yarn hairiness has been attributed to the escape of fibres from the twisting action from within the spinning triangle. The protruding fibres entangle themselves due to the rubbing of yarn with parts of the...
Detection of Warp Elongation in Satin Woven Cotton Fabrics Using Image Processing
In this study, warp elongations in a satin fabric were detected using image processing to reduce yarn breakage during weaving. It was aimed to increase the productivity of the weaving looms. In this work, a high sensitiv...
Investigation of Moisture Management and Air Permeability Properties of Fabrics with Linen and Linen-Polyester Blend Yarns
This paper has focused on moisture management (MMT) and air permeability properties of fabrics produced from linen (100%) and linen-polyester yarns (80% polyester and 20% linen) at different weft densities. In the experi...
Simulation Tests of the Feeding System Dynamics on a Warp Knitting Machine with Four Needle Bars
The article describes simulation tests of the basic element forming a spacer knitted structure in a newly-designed warp knitting machine with 4 guide needle bars. It refers to a concept of forming 3D knitted fabrics alre...