Finite element modeling and analytical solution of a semi-elliptic crack’s J integral
Journal Title: Recueil de mécanique - Year 2017, Vol 2, Issue 1
Abstract
In this work, we first evaluate the J-integral rupture parameter as a function of various crack parameters (crack size, rod dimensions, intensity and nature of loads) for various crack form. In a second step, and in the base of the results obtained by the finite element method, we propose formulas of the factor shape, whose implementation remains rather simple and inexpensive in terms of time, effort and means to the engineer in order to predict evolution of the rupture behavior of a cylindrical component with a semielliptical crack emerging from the surface. The comparison of the proposed analytical solution showed a good performance relatively with results of the literature.
Authors and Affiliations
Abdelkader DJEBLI, Mostefa BENDOUBA, Noureddine DELLA, Abdelkrim AID, Ali BENHAMENA
Numerical study of the chimney-collector junction geometry influence on the solar chimney performances
The aim of this work is to study the influence of the chimney-collector junction geometry on the performance of the solar chimney CCS. Three geometries are chosen for this study: perpendicular, curved and inclined. A mat...
Comparative study between two three-dimensional metrology software
This article presents a comparative study between two three-dimensional metrology software, the Metrosoft software of the "Metromec" machine of the National Polytechnic School of Oran and the Geoverif experimental softwa...
Predictive diagnosis of unbalance and misalignment defects Based on the FFT and DWT of the stator current of an induction motor: Experimental approaches
Because of the complexity of their modelling, mass imbalance and engine misalignment have not received much attention from researchers. Early, correct and reliable detection of these defects helps to stop the propagation...
Thermo-convective structure of a non-Newtonian fluid at different Rayleigh numbers and temperature gradients in a confined cavity
The study of heat transfer by natural convection in a square cavity saturated by a fluid is considered. The two vertical walls are heated and cooled and the other two walls are considered adiabatic. A numerical study of...
DTC-RNA control with 36 sectors of induction motor by PI-fuzzy speed regulator
Direct Torque Control (DTC) is the direct control of the electromagnetic torque of the machine. This article presents a 36-sectors DTC command of an induction machine based on intelligent controllers. A classical PI cont...