Impedance Matching Analysis a Case of Simple 2-Particle Elastic Collision
Journal Title: Engineering and Technology Journal - Year 2025, Vol 10, Issue 02
Abstract
This study analyses IM of the 2-particles collision phenomenon by considering factors such as particle velocity, particle mass, and 2-particles collision restitution coefficient. The results show that IM of 2-particle elastic collision is affected by 3 particle velocity ratios, 1 particle mass ratio, and 2-particle collision restitution coefficient. The IM of 2-particle elastic collisions with maximum conditions only occurs if the particle mass of causing the collision is equal to the particle mass of the target and the 2-particles collision condition is the perfectly elastic. Controlling the particle velocity for the collision causing to have the critical value thus obtained IM of the 2-particles elastic collision with maximum conditions is still a mystery. IM of 2-particles elastic collision under maximum conditions is theoretically and practically impossible to produce kinetic energy transfer with 100% portion.
Authors and Affiliations
I Gede Rasagama , Fachri Koeshardono , Yunita Citra Dewi , Defrianto Pratama,
Keywords
Related Articles
- EP ID EP758459
- DOI 10.47191/etj/v10i02.02
- Views 33
- Downloads 0
Comparative Corrosion Inhibition Test Study in Phosphate Buffer Saline for 316L Stainless Steel with Electrospun PCL Coating with Different Additives
In this study, ten different contents of PCL-based nanofibers containing ZnO, CuO, NiO, 2F TSC, 4F TSC and graphite additives (PCL+Graphite+CuO+NiO+ZnO, PCL+ZnO+Graphite, PCL+ZnO+NiO+CuO, PCL+ZnO, PCL+Graphite, PCL+ZnO+2...
RHEOLOGICAL STUDY ON STRENGTH CHARACTERISTICS OF SANDCRETE HOLLOW BLOCK ADMIXED WITH OIL PALM STEM ASH
The study investigated the use of oil palm stem ash as partial replacement of OPC for sandcrete hollow block production which ranges from 0 to 25% (at 5% interval). Ninety six (96) sandcrete blocks were cast using 1:6 as...
Android-Based Lifestyle Management Application for Type-2 Diabetes Mellitus Patients
Diabetes Mellitus (DM) Type-2 is a chronic disease that occurs due to uncontrolled blood glucose levels in the body. Uncontrolled glucose levels in people with Type-2 Diabetes Mellitus can cause various kinds of complica...
EVALUATION OF THE BOTTOM SURFACE WATER JET IMPINGEMENT COOLING RATE USING MODIFIED RUN-OUT TABLE
Evaluation of Temperature-Time Profiles by the Lumped Thermal Mass analysis method for bottom surface jet impingement cooling system was carried out. This was done by controlled accelerated cooling using a modified run-o...
MACHINE LEARNING UNET-BASED SEGMENTATION OF SENTINEL-1A SATELLITE IMAGES
Image segmentation is an area of study which has generated a lot of interest in engineering in the last few years. Segmentation of Sentinel 1A satellite images is an area that is not as common as that of its optical coun...