Integrated Analytical Study for the Somes Metalic Artefact Discoveri in Ibida Site, Romania
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2012, Vol 35, Issue 1
Abstract
The paper presents the results of the analyses conducted using the SEM-EDX and micro-FTIR co-assisted techniques, on several metallic artefacts unearthed during the excavations at the (L)Ibida archaeological site in Slava Rusă, Tulcea County, Romania, that took place between 2001 and 2008. The data produced is of use in identifying several archaeometrical structural and compositional features which allow for the identification of the origin of the ores, of the alloy type, and of the manufacturing technology. A series of new data is thus produced, that can consolidate the three databases of scientific conservation of metallic artefacts (iarchaeometallurgy/archaeometry/historiography, ii-museum exhibiting, iiiitinerate/transfer/exchange/trade).
Authors and Affiliations
Viorica VASILACHE, Dan APARASCHIVEI, Ion SANDU, Violeta VASILACHE, Ioan Gabriel SANDU
Design and Flow Modelling of Ballast Tank In-Line Ejector
The purpose of this paper is to present the stages of designing a water in-line ejector used for ballast tanks stripping operation. The design operation was performed using NX Siemens CAD and ANSYS 15 for computer fluid...
Zinc Layer Removal at the Steel Appliances Scraps
All appliances contain an important quantity of steel and iron. These can be further recycled at the end of product usefulness. A component of the appliances is the bodies. These are made from galvanized steel. A study f...
Antimicrobial Properties of Semiconductive Oxide Nanoparticles. From Fundamental to Application
A problem of modern society is the spread of diseases worldwide. Infection control and maintaining a high level of hygiene by applying antimicrobial coatings (including medical products, packaging materials, membrane fil...
XRD Analysis in Front of a Corrosion Crack Tip
During exploitation of the heat exchangers some damages can appear in the contact region between the gaskets and the stainless steel walls. The studies upon the material were performed using SEM microscopy, X-ray diffrac...
Structural and Tribological Aspects on Ti (C,O,N) Magnetron Reactive Sputtered Thin-Films
Magnetron sputtering is a flexible technique and allows producing a significant amount of types of coatings. Within the frame of present work, Ti-C-O-N thin films were deposited onto high-speed steel (AISI M2), substrate...