LOAD AND DEFLECTION ANALYSIS OF DIFFERENT BEAM

Journal Title: Engineering and Technology Journal - Year 2016, Vol 1, Issue 4

Abstract

In this study, experimental analysis of various beam which were strengthened with the use of GFRP laminates was carried out and after that the result were compared with the non-strengthened beam called control beam. Three types of beam were casted, out of which two were rectangular beam and one was T-beam. Each type of beam has three specimens and among them one was un- strengthened and two were strengthened beam specimen. After the test results were obtained following conclusions can be made in all the set of beam it was clear that the ultimate load carrying capacity of Control Beam was lesser than that of strengthened beams. In strengthened beams Initial flexural cracks were visible at much higher load as compared to control beam. The load carrying capacity of the U shape Jacket wrapping of beam with laminates was found to be maximum of all the beams. For third set of beam i.e. T-beams it enhances the load to about 40% greater than control beam TB1 and nearly 12% greater than beam strengthened with FRP at the soffit only i.e. TB2.

Authors and Affiliations

Dinesh. , Samik Sharma, Chirag Rohilla,

Keywords

Related Articles

PERFORMANCE EVALUATION OF A PASSIVE SOLAR CROP DRYING

This paper presents the performance evaluation of a passive solar dryer. The Dryer was designed and constructed at the Mechanical Engineering Department of Caritas University, Amorji-Nike, and Enugu, Nigeria. The Dryer w...

Chaos-Based NMPC as a Novel MPPT Approach for Organıc Photovoltaıcs

Environmental degradation, alongside the dire consequences of climate change such as the melting of glaciers and rising sea levels, highlight the severe challenges associated with reliance on fossil fuels. As such, the s...

STORED CARBON FMU LAWU MANUNGGAL USING A BIOMASS APPROACH IN THE COMMUNITY FOREST IN SIDOMULYO VILLAGE, MAGETAN REGENCY, INDONESIA

Community forests provide real benefits, especially the economic value of communities around the forest, and a real contribution to environmental services. One of the benefits of forests is vital for the survival of livi...

A Study on Timeframe based Radical Event Detection on Online News Archive

In the field of Natural Language Processing, Event detection has been an active area of research. While most of the work emphasizes on detecting all possible events by using datasets comprising of news article belonging...

Quality Control for The Maintenance Organization in Clark Pampanga for Line Maintenance

Unscheduled maintenance happens where an unknown problem occurs that is not in the schedule of tasks to be performed by a mechanic unlike scheduled maintenance, line maintenance is done every landing and before take-off...

Download PDF file
  • EP ID EP705392
  • DOI -
  • Views 42
  • Downloads 0

How To Cite

Dinesh. ,    Samik Sharma,  Chirag Rohilla,   (2016). LOAD AND DEFLECTION ANALYSIS OF DIFFERENT BEAM. Engineering and Technology Journal, 1(4), -. https://www.europub.co.uk/articles/-A-705392