Nano-Structural Standard of Friction and Wear
Journal Title: Tribology in Industry - Year 2018, Vol 40, Issue 2
Abstract
At the most full evolution of tribocontact the unique nanostructure (subtribosystems) is formed and the basis of which is one mechanical (nano) quantum. Mechanical quantum represents the least structural form of solid material body in conditions of friction. It is dynamic oscillator of dissipative friction structure and can be examined as the elementary nanostructure of metal’s solid. At friction in state of most complete evolution of elementary tribocontact all mechanical quantums with the exсeption of one elasticity and reversibly transform energy of outer impact (mechanic movement). In these terms only one mechanical quantums is the lost – standard of wear. Some practical examples with using of mechanical quantum idea as standard of wear are considered.
Authors and Affiliations
S. V. Fedorov
Keywords
Related Articles
- EP ID EP293391
- DOI 10.24874/ti.2018.40.02.06
- Views 87
- Downloads 0
Experimental Evaluation of the Surface Alteration of Gasket Samples under Operative Conditions
This paper investigates the surface alteration of gasket samples commercialized by two alternative producers. These gaskets, in polymeric materials, are installed in process plants used for cleaning tires molds by a pion...
Effect of Surface Roughness and Temperature on EHL for Parallel Surfaces Subjected to High Acceleration
Frictional wear is one of the most common causes of material failure. One of the most common techniques to overcome this is to lubricate the surfaces in contact using an optimum amount of appropriate lubricant. Same tech...
Experimental Investigation on Tool Wear Behavior and Cutting Temperature during Dry Machining of Carbon Steel SAE 1030 Using KC810 and KC910 Coated Inserts
The removal of cutting fluids and lubrication in dry machining operations requires a good knowledge and full control of all the mechanisms that lead to tool damage. In order to optimize dry machining operations, it is ne...
Experimental Study of Adhesive Wear of a Holding Device Using a Cross Cylinders Tester
Adhesive wear was identified in a cylinder of a rotating holding device of a forming die system, which permits to hold and align a leaf spring to carry out a punching operation at the automotive industry. To investigate...
Wear Resistance Increase of Samples Tribomating in Oil Composite with Geo Modifier КGМF-1
Increase of wear resistance of different types of tribomating which are functioning in fluid lubrication is possible due to: choosing more expensive and high quality material of samples that is not always sensible; apply...