Multiaxial fatigue of aluminium friction stir welded joints:preliminary results
Journal Title: Frattura ed Integrità Strutturale - Year 2015, Vol 9, Issue 33
Abstract
The aim of the present research is to check the accuracy of the Modified Wöhler Curve Method (MWCM) in estimating the fatigue strength of friction stir (FS) welded tubular joints of Al 6082-T6 subjected to in-phase and out-of-phase multiaxial fatigue loading. The welded samples being investigated were manufactured by equipping an MTS I-STIR process development system with a retracting tool that was specifically designed and optimised for this purpose. These specimens were tested under proportional and non-proportional tension and torsion, the effect of non-zero mean stresses being also investigated. The validation exercise carried out by using the generated experimental results allowed us to prove that the MWCM (applied in terms of nominal stresses) is highly accurate in predicting the fatigue strength of the tested FS welded joints, its usage resulting in estimates falling with the uniaxial and torsional calibration scatter bands.
Authors and Affiliations
D. Hattingh, M. James, L. Susmel, R. Tovo
Keywords
Related Articles
- EP ID EP163663
- DOI 10.3221/IGF-ESIS.33.42
- Views 63
- Downloads 0
L’infragilimento da idrogeno. Un caso di studio in una barra di comandi di un velivolo dell’aviazione generale.
La degradazione delle caratteristiche meccaniche di un materiale di impiego aeronautico ha pesanti ricadute sulla sicurezza del volo. Tale degradazione si può manifestare sia per l’effetto combinato tra l’ambiente...
Analysis of cracking of low-alloy copper stretched at elevated temperature
This paper presents both mechanical and structural aspects of micro-cracking of CuNi2Si copper alloy in CNCS grade revealed during the static tensile test in the temperature range between 20ºC and 800ºC. The...
Microstructural characterisation related to hot tearing of Al-Cu sand mould castings
In this paper, the hot tearing behaviour in Al-(4.86)%Cu sand mould castings was preliminary investigated by means of microstructural examination and image analysis. A dog-bone pattern was employed for the realisation o...
Role of multiaxial stress state in the hydrogen-assisted rolling-contact fatigue in bearings for wind turbines
Offshore wind turbines often involve important engineering challenges such as the improvement of hydrogen embrittlement resistance of the turbine bearings. These elements frequently suffer the so-called phenomenon...
Are the Paris’ law parameters dependent on each other?
The question about the existence of a correlation between the parameters C and m of the Paris’ law is re-examined in this paper. According to dimensional analysis and incomplete self-similarity concepts applied to...