Optimization of Process Parameters in Turning Operation of Austenitic Stainless Steel Rod using Taguchi Method and ANOVA
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 3
Abstract
This research paper is an outcome of investigation made on the parameters those affects on austenitic stainless steel work piece roughness in the turning operation as a part of that the parameters involved in the operation were analyzed and formulated as a Design of experiments to check out the influence of them in the turning operation. Mainly spindle speed, feed rate and depth of cut were taken as chief contributors in the development of proper work piece surface. And the emphasis is made on the roughness of the work piece as a part of that the objective of the work is done to minimize the roughness by optimizing the process parameters. The results of the experiments made by the Taguchi’s method have taken into further investigation by the Analysis of Variance (ANOVA) method. Out of all parameters the feed rate was found as an important parameter that influences the surface roughness.
Authors and Affiliations
A. Suresh, G. Diwakar
Keywords
Related Articles
- EP ID EP614303
- DOI 10.24247/ijmperdjun201941
- Views 103
- Downloads 0
Experimental Investigation of Stitched and Unstitched Bamboo Fiber Using Sugarcane Powder
To examine the performance analysis of stitching and unstitching of a bamboo fiber laminates and to investigate the de-lamination resistance of laminates. Unstitched, and stitched specimens were prepared with orientation...
Development of Different Renewable Energy Based Cold Storage Units for Jammu and Kashmir State
Jammu and Kashmir is a horticultural based economy with most revenue coming from horticulture produce. The fruit growers of Kashmir are witnessing losses and exploitation, because of unavailability of cold storage units...
Performance Improvisation and Mathematical Modelling of Hardness of Tube Tex Roller Used in Textile Industry
The tTextile industry is a rapidly growing industry and seen many innovations to till date. One of the widely used machines in this industry is the Tube Tex compacting machine. It is used to remove the shrinkage in the f...
An Investigation of Comparative Study in Connecting Rod by using Finite Element Analysis
Most of the automobile parts are connected with the help of connecting rod. More vibration occurs on the engines. This project deals with reducing the vibration and calculates the natural frequency of the engines. The to...
A Technical Review on the Study of Stability Analysis of Non-Circular Bearings Lubricated with Newtonian/Non-Newtonian Fluids
In recent years, applications of non-Newtonian fluids as lubricants have received great interest since the use of these non-Newtonian lubricants showed an increase in load carrying capacity and reduction in frictional fo...