RESEARCHING AND MODELING OF THE DYNAMIC VISCOSITY OF THE FERRO-OILS WITH THE DIFFERENT CONCENTRATIONS OF MAGNETIC PARTICLES IN THE ASPECT OF PRESSURE CHANGES
Journal Title: Tribologia - Year 2017, Vol 272, Issue 2
Abstract
In this article, the results of the experimental research of determining the dynamic viscosity of the ferro-oils with different concentration of the magnetic particles in terms of pressure change are presented. The research was conducted on the Thermo Scientific Haake Mars III rheometer in the configuration with a pressure chamber. The applied configuration allowed the author to conduct research on the change of viscosity for the selected pressure values p in range from 0 to 100 bars. The research was conducted for three selected temperature values, including t = 30°C, 60°C, and 90°C, as well as selected shear rates of 200 and 600s-1. The chosen concentration values of the magnetic particles were nCS = 1%, 2%, 4%, 6%, and 8%. The viscous characteristics gathered as a result of the research have been analysed with the aim of identifying the nature of the correlations and to create mathematical-physical models of changes in the dynamic viscosity of the ferrooils due to the change in pressure in terms of concentrations of the magnetic particles. Analysis, identification, and adaptation of the characteristics were conducted using the StatSoft STATISTICA ver. 9 software. Selected mathematical adaptations of the acquired results were submitted through the enhanced analysis. In addition, parameters of the course of functions were designated and their qualitative assessments were made.
Authors and Affiliations
Marcin FRYCZ
WPŁYW DITIOFOSFORANU CYNKU NA TARCIE I ZUŻYCIE CZĘŚCIOWO STABILIZOWANEGO TLENKU CYRKONU CZĘŚĆ I. WŁAŚCIWOŚCI TRIBOLOGICZNE DI-N-ALKILODITIOFOSFORANÓW CYNKU
Tribologiczne właściwości di-n-alkiloditiofosforanów (ZDTPs) w styku pary tarciowej jonowego – ZrO2 częściowo stabilizowanego Y2O3 [PSZ] były badane z użyciem tribometru kula-dysk w 25ºC. Stwierdzono, że ZDTPs znacząco z...
THE STRUCTURE AND PROPERTIES OF IRON ALLOYS WITH VARIOUS CHEMICAL COMPOSITIONS AFTER DIFFUSIONAL BORONIZING
The purpose of the paper was to test how the content of carbon and alloying elements in steels influence the structure and properties of boronized layers. The following grades of steels were used during the tests: C45, C...
ANALYSIS OF FRACTURE AND WEAR RESISTANCE OF ZrN COATINGS
The article presents the results of mechanical and tribological studies of ZrN coatings that allowed the determination of their hardness, elasticity modulus, and scratch and wear resistance. Tests were carried out for 1,...
THE EFFECT OF LOW-FRICTION PVD COATINGS ON SCUFFING AND PITTING RESISTANCE OF SPUR GEARS
Recently, it was reported that low-friction coatings deposited on steel substrates exhibit excellent behaviour under scuffing conditions. However, a factor still limiting the scope of the application of the coatings is t...
EVALUATION OF LUBRICATING PROPERTIES OF SELECTED LUBRICANTS USED IN EXPLOITATION OF CRANE
W publikacji przedstawiono wyniki badań własności smarnych olejów handlowych silnikowego 10W40 Turbo Diesel oraz hydraulicznego Hydrol L-HL 46 oraz te same oleje handlowe modyfikowane 5% stężeniem objętościowym preparate...