Study of the pressure distribution during the optical glass polishing
Journal Title: Recueil de mécanique - Year 2017, Vol 2, Issue 1
Abstract
The reproduction of very high quality surfaces during the optical glass polishing is the mannered main objective. To come closer this objective, it is necessary to take in consideration all polishing parameters while more especially interesting to the change of the surface polished shape determined by the intermediate of the distribution pressure measure and the surface contact. In this paper, one determines of the pressure distribution and the surface contact between the pad polishing LP35 and the glass BK7 during the polishing, while using the sensor of pressure. Results show that the change of the glass surface shape is in large part to the variation of the contact surface during the polishing.
Authors and Affiliations
Hasna MOUNIR, Amine HAMDI, Toufik ALIOUANE, Djamel BOUZID
Keywords
Related Articles
- EP ID EP302113
- DOI 10.5281/zenodo.1134965
- Views 48
- Downloads 0
Theoretical and experimental investigation of on glass solar still
This paper presents a theoretical and experimental work performed on a glass solar still. The solar distiller under study was fabricated with cheap glass and the polyethylene as absorber, and was tested under the climati...
Definition and prediction of thermal state of cylinder assembly of an internal combustion engine: a new methodology
This study deal with a new approach for the definition and prediction of the thermal state of internal combustion engine elements. In this paper, it is well elaborated for diesel engine cylinder liner. The scientific inn...
Analysis of the influence of angular speed on the wear of a trapezoidal toothed timing belt
Timing belts are essential elements in automobile mechanics. Notched and tensioned, the belt allows the engine components to act synchronously. Its function is mainly to drive the crankshaft and the camshaft, which thems...
Numerical prediction of imperfections influence on the film cooling effectiveness
Film cooling is one of the most used techniques for cooling turbine blades. This process is influenced by several geometric and aerodynamic parameters. One such parameter is the geometric shape of the injection holes: th...
Experimental and numerical evaluation of the implant-cement strength of the femoral prosthesis
This study investigated the influence of Implant surface roughness on the resistance of the implant–cement interface. Mechanical fixation at the implant–cement interface was evaluated in vitro using shear loading with st...