THE EFFECT OF ELECTRIC FLOW ON DECORATIVE KROM ELECTROPLATING WITH COPPER BASE METAL TOWARD CORROSION RATE

Abstract

In this study a decorative chrome electroplating process has been carried out with a copper base metal, metal electroplating is often used as a means to provide a thin layer on the surface of other metals or substrates using metal which has advantages in terms of property and corrosion resistance. In decorative chrome electroplating nickel and chrome are used as coatings, nickel and chrome are used as coatings because of their protective and decorative properties, protective means they can prevent corrosion and decorative because they look shiny so they look attractive. Copper metal is chosen because of its huge application in the community. This study aims to measure the corrosion rate in copper metal after a decorative chrome electroplating process based on electric current used during the electroplating process. This research is important because during the electroplating process a decorative chrome electoplating technique will be obtained in the form of modules, and the module will be used to train students to increase their skills. This research was conducted in the IKIP Mataram chemical laboratory with a time of one year. The process carried out in this study sequentially is to prepare an electrolyte solution used for electroplating, preparing the copper base metal to be free of oxide or rust, nickel coating and finally coating with chrome. From the coating process carried out then the results will be analyzed the corrosion rate by immersion in NaCl solution at a concentration of 36.05 grams / L for 336 hours, based on variations in electric current used during the electroplating process of 0.5; 1; 1.5; 2; and 2.5 Ampere, the corrosion rate results were 0.029; 0.013; 0.017; 0.022; and 0.012 mm / yr; while the copper metal which is not coated with a corrosion rate is 0.308 mm / yr. Thus it can be concluded that copper metal coated with nickel chrome will effectively resist the lowest rate of corrosion in the current given 2.5 Ampere.

Authors and Affiliations

Ahmadi Ahmadi, Citra Ayu Dewi

Keywords

Related Articles

PENGARUH PEMBELAJARAN SAVI BERBASIS MEDIA SIMULASI INTERAKTIF TERHADAP KETERAMPILAN BERPIKIR KRITIS MAHASISWA PADA MATERI ELEKTROKIMIA

Characteristics of electrochemical material that contains abstract concepts. Hence often have difficulty in teaching it. An effective approach as a solution is the SAVI-based interactive learning approach of interactiv...

Pengembangan Perangkat Pembelajaran Fisika Menggunakan Model Siklus Belajar 5E untuk Melatihkan Kemampuan Berpikir Kritis

The objective of this reaserch was to produce physics learning materials with learning cycles (5E) model which focuced on the validity, practically, and effectiveness to facilitate student’s critical thinking ability i...

IMPLEMENTASI ONLINE LEARNING PROGRAM (OLP) DENGAN MEDIA PEMBELAJARAN BERBASIS MULTIMEDIA UNTUK MENINGKATKAN PEMAHAMAN MATAKULIAH BIOLOGI UMUM PADA MAHASISWA PROGRAM STUDI PENDIDIKAN MATEMATIKA STKIP BINA INSAN MANDIRI SURABAYA

The research was conductedon for the first semester students of mathematics education faculty at STKIP-BIM Surabaya. The purpose of this research included:1) Obtain data on Implementation of Online Learning Program (OL...

PENGARUH PENGGUNAAN HANDOUT BERBASIS PEMECAHAN MASALAH TERHADAP KETERAMPILAN BERPIKIR KRITIS DAN KETERAMPILAN BERPIKIR KREATIF SISWA

This study aims to determine the effect of using problem-based handouts on critical thinking skills and students' creative thinking skills in Static Fluid material. The population of this study were all students of cla...

Validitas Instrumen Karakterisasi Kemampuan Metakognisi Mahasiswa Calon Guru Fisika

The purpose of this study was to describe the validity of the metacognition ability instruments which include metacognition knowledge and metacognition awareness. The metacognition knowledge instrument in the form of e...

Download PDF file
  • EP ID EP35969
  • DOI -
  • Views 396
  • Downloads 0

How To Cite

Ahmadi Ahmadi, Citra Ayu Dewi (2013). THE EFFECT OF ELECTRIC FLOW ON DECORATIVE KROM ELECTROPLATING WITH COPPER BASE METAL TOWARD CORROSION RATE. Prisma Sains: Jurnal Pengkajian Ilmu dan Pembelajaran Matematika dan IPA IKIP Mataram, 1(2), -. https://www.europub.co.uk/articles/-A-35969