ZARZĄDZANIE ENERGIĄ W PRZEMYŚLE
Journal Title: Proceedings of Electrotechnical Institute Prace Instytutu Elektrotechniki - Year 2016, Vol 63, Issue 272
Abstract
Planowanie strategiczne i zarządzanie energią w obiektach przemysłowych obejmuje szeroki zakres wiedzy inżyniersko-menadżerskiej. Nowe techniki pomiarowe pozwalają na gromadzenie dużej ilości danych oraz ich analizowanie, dzięki czemu można wpływać w czasie rzeczywistym na wskaźniki w gospodarce energetycznej. W artykule przedstawiono wybrane zagadnienia dotyczące efektywności energetycznej i strategii działania w sektorze przemysłowym oraz przykład komputerowego wspomagania zarządzania gospodarką energetyczną.
Authors and Affiliations
Bogumiła WNUKOWSKA
Keywords
Related Articles
- EP ID EP78967
- DOI 10.5604/00326216.1197322
- Views 70
- Downloads 0
ANALYSIS OF THE DISTRIBUTION OF THE MAGNETIC COMPONENT OF ELECTROMAGNETIC FIELDS UNDER POWER LINES IN THE REAL FIELD CONDITIONS FREE FROM THE ERROR BROUGHT BY FLUCTUATIONS OF CURRENTS
The paper presents a new method for the measuring of the electromagnetic field distribution under power transmission lines in real field conditions. This method is free from errors brought by fluctuations of voltage, cur...
CHANGES TO THE SF6 OUTFLOW AREA IN THE NOZZLE OF A HIGH VOLTAGE AUTO-PNEUMATIC CIRCUIT BREAKER DURING A SHORT-CIRCUIT CURRENT INTERRUPTION
The paper presents a calculation method for the SF6 outflow area across the critical cross-section of the nozzle in an HV puffer circuit breaker during the interruption of a short-circuit current. The presence of an elec...
THE INFLUENCE OF MOISTURE CONTETNTS ON THE DIELECTRIC RELAXATION OF NOMEX-OIL AND PRESSBOARD-OIL INSULATING SYSTEMS
The paper presents measurements of FDS (Frequency Domain Spectroscopy) taken on solid-liquid insulating systems with various moisture contents, based on the aramid paper (NOMEX®) or the pressboard impregnated with transf...
ANALYSIS OF THE INFLUENCE OF A POWER INDUCTANCE ON THE OPERATION OF A BRIDGE RECTIFIER
A full-wave bridge rectifier is one of the most often used non-linear load. A main area of its using are single-phase power suppliers which are a part of the most of electronic devices. The power consumption of these dev...
ZnO FOR PHOTOVOLTAICS
Despite of a large reductions of costs energy produced by solar panels is still too expensive. There are two approaches to change this situation: by (a) increase of device output and/or (b) reduction of device costs by u...