Heat Transfer Analysis of Thermal Oil Plant on Fuel Oil Tanks of 17500 LTDW Product Oil Tanker
Journal Title: International Journal of Marine Engineering Innovation and Research - Year 2018, Vol 2, Issue 2
Abstract
The thermal oil system is one type of heater that widely used on ships. The system is an important system used to heat fuel that will be used for the operation of the main engine, auxiliary engine, and boiler. This system has been installed on 17500 LTDW Product Oil Tanker, MT. Parigi, but not yet tested so that it does not know whether the system is able or not to transfer heat from heating equipment (boiler and economizer) to each fuel tank in accordance with the desired value. Therefore, this research performs an engineering evaluation in term of heat transfer analysis to ensure that the heat transfer process of thermal oil from heating equipment to the fuel tanks is already meeting the required temperature or not. This analysis is done by using thermodynamic equation, namely heat balance equation and heat loss equation. The result shows that the heat transfer of thermal oil to each fuel tank corresponds to the desired value, namely 180oC for the thermal oil inlet temperature to each fuel tank and 140oC for the thermal oil re-enter temperature to the heating equipment.
Authors and Affiliations
Taufik Fajar Nugroho, Wolfgang Busse, Ede Mehta Wardhana, Juda Imanuel Osvaldo Panggabean
Keywords
Related Articles
- EP ID EP333938
- DOI 10.12962/j25481479.v2i2.2615
- Views 214
- Downloads 1
Development of Load Characteristic for The Main Engine and Its PLC Compatible Preparation in Cooperation with The Water Brake as The Generator
Water brake can be used in any application where a load brake is required on a rotational load. In the engine industry, dynamometer is used in conjunction with a power source and instrumentation to determine engine HP, T...
Analysis Evacuation Route for KM Zahro Express on Fire Condition using Agent Based Modeling and Fire Dynamics Simulatior
Safety is the thing that needs to be preferred by users of transport, passengers should also understand about safety procedures and evacuation procedures in the means of transport. There have been many accidents that hap...
Analysis of Three Phases Asynchronous Slip Ring Motor Performance Feedback Type 243
Induction motor is an Alternating Current Electric Motor (AC), this motor most widely used. There are two types of rotor on three-phases asynchronous motor, the squirrel-cage rotor and the slip ring rotor. Every motor ha...
Analysis of the Suppression Device as Vortex Induced Vibration (VIV) Reducer on Free Span using Finite Element Method
Subsea pipeline is a transportation infrastructure of oil and gas as an alternative for ship tanker. The uneven topography surface of the sea floor resulting the pipe undergoes free span. The free span is a condition end...
Fluid Flow Analysis of Jacket Cooling System for Marine Diesel Engine 93 Kw
The main function of cooling system is to control the temperature in the engine. To know the flow in the jacket cooling system for marine diesel engine 93 KW and the couple simulation between 1D modeling and 3D modeling,...